SURFCOM TOUCH 50 Surface Texture Measuring Instruments
Compact Surface Texture Measuring Instrument for Easy Operation
- Straightness accuracy is 0.3μm/50mm.
- Simplified 16% rule automatic discrimination.
- LCD panel simplifies operation: The LCD touch panel allows entry of data using a touch pen or your finger and can be used in field environments.
- Complied with international standard analysis parameters: Support ISO, DIN, ASME and CNOMO standards in addition to new and old JIS.
- Able to measure level of difference and film thickness:
The customize function can be used to create a special menu where only the icons that are used most frequently are displayed, substantially enhancing operational efficiency.
The AI (artificial intelligence) function automatically selects the ideal cut-off value, measuring range and
other conditions simply by entering the parameters and allowable values denoted on the machining drawing.
This automates measurement.
This function guides theuser through the measuring procedures, enabling beginnersto make measurements.
A short note or diagram can be entered with the touch pen and printed using the memo function.
The unit incorporates 34 types of roughness parameters (Ra, Rz, Ry, Sm, S, tp, etc.) and 32 types of waviness parameters.
Level difference of electrical parts, film thickness, surface area and other items can be analyzed with maximum precision.
Six types of automatic tilt correction are provided: Linear, first half, latter half, both ends, round surface and spline curve (patented).
The waveform on the screen is enclosed by two cursors, allowing the desired evaluation range to be set and the parameters to be calculated.
Measuring conditions, measured result management or measured data can be output in binary and text format. This data can be easily read from the PC card slot on a personal computer. Storage of data on CF cards and other types of memory cards is possible to use.
| Item / Model | SURFCOM TOUCH 50 | |
|---|---|---|
| Measuring range | Z direction | ±500 μm |
| X direction | 50 mm | |
| Evaluation Length | 0.1 to 50 mm | |
| Detector vertical movement volume | 50 mm | |
| Measuring force | 0.7mN | |
| Straightness accuracy | 0.3 μm/50 mm | |
| Measurement Speed | 0.15, 0.3, 0.6, 1.5, 3 / 0.05, 0.1, 0.2, 0.5, 1 mm/s (Switching) | |
| Corresponding standards | JIS-1994/1982, ISO, DIN, ASME, CNOMO | |
| Miscellaneous | Power supply | AC100 to 240 V ±10%, 50/60 Hz, Single phase |
| Power consumption | Maximum 80 VA | |
| External dimensions (W x D x H) | Printer-Equipped Model_Amplification indicator: 320 x 167 x 44 mm | |
| Weight | about 4.2 kg for the entire system | |
- Straightness accuracy is 0.3μm/50mm.
- Simplified 16% rule automatic discrimination.
- LCD panel simplifies operation: The LCD touch panel allows entry of data using a touch pen or your finger and can be used in field environments.
- Complied with international standard analysis parameters: Support ISO, DIN, ASME and CNOMO standards in addition to new and old JIS.
- Able to measure level of difference and film thickness:
The customize function can be used to create a special menu where only the icons that are used most frequently are displayed, substantially enhancing operational efficiency.
The AI (artificial intelligence) function automatically selects the ideal cut-off value, measuring range and
other conditions simply by entering the parameters and allowable values denoted on the machining drawing.
This automates measurement.
This function guides theuser through the measuring procedures, enabling beginnersto make measurements.
A short note or diagram can be entered with the touch pen and printed using the memo function.
The unit incorporates 34 types of roughness parameters (Ra, Rz, Ry, Sm, S, tp, etc.) and 32 types of waviness parameters.
Level difference of electrical parts, film thickness, surface area and other items can be analyzed with maximum precision.
Six types of automatic tilt correction are provided: Linear, first half, latter half, both ends, round surface and spline curve (patented).
The waveform on the screen is enclosed by two cursors, allowing the desired evaluation range to be set and the parameters to be calculated.
Measuring conditions, measured result management or measured data can be output in binary and text format. This data can be easily read from the PC card slot on a personal computer. Storage of data on CF cards and other types of memory cards is possible to use.
